Arbortech AS160 Instruction Manual download pdf (Page 6)

3. SPECIFIC SAFETY RULES

1. Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may

contact hidden wiring or its own cord. Contact with a "live" wire will make exposed metal parts of the tool

"live" and shock the operator.

Remove adjusting tools such as Allen & Ian keys and wrenches before operating the tool.

Do not operate the tool with any attachment other than those recommended in this instruction manual.

Only use the tool with the correct voltage, as specified in the tool lable.

Never start a tool under load. Start the tool before engaging the work piece.

Never start or operate the tool with fingers or other objects through the holes in the blades.

7. Use care when handling blades during and after use. The blades and some areas of the tool become hot

in use.

Always ensure that before cutting there are no hazards such as electrical wiring, pipes or insulation in

the area to be cut.

9. Allow for resting periods to ease the effect of the vibration of the tool. Use work gloves to minimise

vibration effect on the body.

10.

Ensure the dust extraction equipment is connected and properly used.

11. Keep handles dry, clean and free from oil and grease.

12. If the guard or other part appears to be damaged, it should be carefully checked to determine that it will

operate properly and perform its intended function.

13.

The use of any accessory or attachment other than those recommended in this instruction manual may

present a risk of personal injury.

14. Do not force the tool. It is designed to operate with moderate effort. Overheating of the drive system and

motor can occur if the tool is overloaded.

15.

Always operate the tool holding it with both hands.

SYMBOLS

The following show the symbols used in this manual

.......... Class 2 Construction (Double Insulation used throughout, no provision for earthing.)

VAC .......... volts alternating current

A .......... amperes

Hz .......... hertz

W .......... watt

.......... no load speed

rpm .......... revolutions per minute

AS160

dB .......... decibels

Nm .......... newton meters

m .......... meters

m/s .......... meters per second

mm .......... millimeters

kg-m .......... kilogram meters

ft-lb .......... foot pounds

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

Comments to this Manuals

No comments

Arbortech AS160 Instruction Manual Page 6

Comments to this Manuals

Related products and manuals for Circular saws Arbortech AS160